PRODUCTS
/
/
/
Epoxy iron red shop primer
Number of views:
1000

Epoxy iron red shop primer

Retail price
0.0
元
Market price
0.0
元
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
Category
1
Details
Parameters
Product Overview: a two-component epoxy shop primer formulated from inorganic pigment, epoxy resin and polyamide curing agent
Main characteristics:
good rust resistance, can be matched with most paint systems
the paint film contains no zinc, no harmful gases during welding and cutting.
excellent weld cutting performance
Uses: as a shop primer on the steel pretreatment line by shipyard, heavy machinery factory, container etc.
Maintenance period about 3-6 months 
Color:iron red, matt
Volume solid content: 45±2%
Standard film thickness:25 micron by dry film(56 micron by wet film)
Theoretical coating rate:Theoretical coating rate at25micron dry film thickness 17.2m2/l(appropriate loss factor allowed)
Application methods:airless spray, roll coating, brushing
Flash point: 5℃(mixture)
Drying time:
25℃
surface  drying ≤5min
hard  drying ≤24h
fully cured 7d
Production line drying time≤5min(steel preheating50℃,drying tunnel temperature120℃)
Painting time after mixing:
time of use 12h(5℃) 4h(25℃) 2h(35℃)
Painting methods:
airless spray thinner   08251
dilution amount   0-5%(by paint weight)
roll coating/brushing thinner   08251
dilution amount   0-3%(by paint weight)
Cleaner:thinner08251
Storage period: 12 months, stored in a dry and cool place, away from heat and fire
Surface treatment andsubstrate temperature:Oxidized steel: sand-blasting to Sa2.5;
Non-oxidized steel: sanding to St3 with elastic grinding wheel;
Steel coated with shop primer: secondary descaling for paint film damage and rust, sanding to St3;
Burnt part through welding flame cutting or flame correction: sanding to St3, the substrate temperature must be higher than the dew point 3℃
Cautions:During the painting and drying process, appropriate ventilation and precautions must be taken to control the solvent concentration within the safety limits to prevent the risk of poisoning or lack of oxygen. Take protective measures to prevent skin and eyes from coming into contact with the product. Specific safety measures such as gloves, goggles, and masks should be determined depending on the application method and working environment.
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
YanTai GuangCi Coatings Co., Ltd.

Address:

Taocun economic development zone of Yantai Shandong

YanTai GuangCi Coatings Co., Ltd.

E-mail:

150168216@qq.com

Username used for comment:
Message
Description:
验证码

© YanTai GuangCi Coatings Co., Ltd.

鲁ICP备20019790号 Powered by:www.300.cn

 

YanTai GuangCi Coatings Co., Ltd.